DOM MB Diagnosis page
# Lines beginning with "#" are
comments/instructions for filling out the form.
#Delete
comments/Instructions; Replace Everything else in RED with your own
comments.
# A number of blocks of
symptoms/diagnosis/disposition may appear in a
"details" file, one for each pass through diagnostics.
# The most recent block is near
the top of the file. Older diagnostic
blocks are located after newer blocks.
# Syntax like [ option_1 |
option_2 | ...] suggests that option_1 or
option_2 should occupy that place in the field.
# Syntax like <Month, day,
year> should be filled in with the correct date. <instruction> should be
replaced with apropriate information.
# When in doubt, include more information, even if it doesn't
make much sense... It may be useful for someone else later!
Board ID:
<Board Rev,
builder, batch, and Serial Number>
Source:
[ Delivered | Non-Delivered: |
Returned ] <Month, day, year>, by
[ LBL person | PCB Loading House |
Collaborating institution ]
#Non-Delivered boards reach
LBL already identified by PCB loading house as non-conforming.
or suspicious..
#Delivered boards pass PCB
loading house tests.
Symptoms:
<Detailed description of
symptoms>
# Probably supplied by whoever identified the board as non-conforming.
Analyst(s):
<Person discovering the
problem. Person(s) diagnosing the problem.
Persons involved in mitigation.>
# May be useful for tracking down additional information.
Analysis Procedure(s):
<Description of the techniques
applied to discovering the root
problem>
Root cause:
<What caused the symptom(s)>.
# Multiple problems will have multiple root causes.
Mitigation:
<What was replaced or repaired
or jumpered or removed in order to
restore partial or full functionality>
# If only partial functionality can be recovered, describe the
functional limitations.
Disposition:
[ Diagnosis on hold |Repaired
Deployable | Repaired
Non-Deployable | Repaired Return to Stream | Not Repairable ]
Any Other Information:
<Limitations of repairs>
<Prejudices for or against
deployment, or scrapping>
<Photographs>
<Test Data>
<Emails>
# May be left blank, but probably shouldn't...