DOM MB V5.1 Diagnosis
page
Board ID:
V5.1 001016
Step:
Vendor Firmware Load
Symptoms:
March 10, 2005, ID code from board does not match ID code in the
BSDL file
Analyst(s):
G. Przybylski
Analysis Procedure(s):
5.3/05: Found CPLD blank. Loaded. Loaded Config Memory. Loaded
Flash Memory.
STF Tests produced many ATWD related errors.
SPE Pulser 1PE ChipA Ch0
SPE Pulser 1PE ChipB Ch0
SPE Pulser 40PE ChipA Ch0
SPE Pulser 40PE ChipB Ch1
SPE Pulser 8PE ChipA Ch0
Single 8PE ChipA Ch0
Ped 1PE ChipA Ch0
Ped 1PE Chip B Ch0
fADC Baseline
Pedestal voltages look OK
Root cause:
Probable snafoo in programming.
Mitigation:
Reload firmware and Test
Disposition:
Defer remaining diagnostics
Any Other Information:
Traveler April 10, 2005
